Gogo Inflight on Windows Touch

The instructions outline the special steps required when experiencing delays while connecting to Gogo Inflight with a Windows Touch device.

1. From the right bottom corner of the Windows Touch screen, swipe in an upward diagonal motion.
2. Tap or click Settings.
3. Tap or click the Wi-Fi networks icon (it shows bars of signal strength).
4. Tap or click on a Gogo Inflight network and select Connect.
   • If credentials haven't been entered, the Account page will appear and ask for a Username, Password, and Domain. Once these are entered, click or tap Login button.
5. After a few moments, a screen will appear asking the user for additional validation.
6. Enter the appropriate response in the CAPTCHA validation screen.
7. Click or tap on Activate Service.
8. Once login is successful, the Open Mobile welcome screen will appear and show the user they are connected.

1. Open the Charms bar by swiping your finger from the right edge of the screen or holding the curser on the top-right corner of the screen (if you are using a mouse) until it appears.
2. Tap or click Settings.
3. Tap or click the networks icon (it shows bars of signal strength).
4. Tap or click on the Gogo Inflight network to and select Disconnect.

Go to: Other Product Documents > Tech Notes